Re: [MW:24598] Distance between two L-Seam

ASME Code has a restrictions for staggering. You may use this one

Sent from my BlackBerry 10 smartphone.

From: Ritixa Tandel Sent: Δευτέρα, 21 Μαρτίου 2016 - 12:27 To: Materials & Welding Reply To: materials-welding@googlegroups.com Subject: Re: [MW:24562] Distance between two L-Seam

HELLO,

I AM STUDYING & REFERRING ABOUT DESIGN OF EQUIPMENT. 

CONTINUE TO YOUR DISCUSSION ABOUT ''DISTANCE BETWEEN TWO L-SEAM''........

WHAT SHOULD BE THE MINIMUM DISTANCE IF MY REACTOR IS LIKE THIS:

--SS 316 L REACTOR (3 KL WORKING CAPACITY)

--SHELL: 1500 MM ID x 1700 MM LG x 8 MM THK

--REACTOR WITH DOUBLE LIMPET COIL.

REGARDS RITIXA.

ANKLESHWAR, GUJARAT. INDIA.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/7750e6fe-212b-40ed-945e-9d1d8b6c309f%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.