Re: [MW:24576] Preheating and PWHT for B31.3 CS mtls

I have checked this but for PWHT the minimum thickness is not given.

BINOY L
QC Engineer-Mechanical
   

On 24 Mar 2016 7:08 pm, "Lalu Rajendran" <lalucpt@gmail.com> wrote:

Hi,

As per ASME B31.3 Edition2014, there is the exception for PWHT for P1 Carbon steel materials. Please see the below extract.

regards,

LALU

On Wed, Mar 23, 2016 at 8:11 AM, Binoy Lonappan <binoypl3@gmail.com> wrote:

Whats the thickness shall be done with PWHT CS material as per B31.3 latest edition .
Here the joint is  branch weld of high thickness weldolet with low thickness pipe.

BINOY L
QC
   

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKrfo%2BDDp29cSaJxULSRAPbqaYcSRgp%2BXmRzmU76c0XFQJorRg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOwU13tQWAZMSoY5C1OXOqYQYDHrSwnGvHcOuBR6MJc153h4dA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKrfo%2BBFw2yGYR20SzfvavkwRpBjtdhY1-opPwrVVms%3DHb7qLQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.