[MW:24533] RE: 24532] RE: 24531] RE: 24530] RE: 24528] WPS for SAW

Hi Goswami, thanks a lot fir the info, however in one of my earlier site I welded with square but for 18mm double side SAW weld, however I lost that data, some of the water sector teams might have the data, and I am looking for the same.


Lakshman kumar.B
Project manager.
9440031459

---

From: pgoswami
Sent: ‎15-‎03-‎2016 21:41
To: materials-welding@googlegroups.com
Subject: [MW:24532] RE: 24531] RE: 24530] RE: 24528] WPS for SAW

Hello Lakshman,

 

Square butt SAW on 20 mm (3/4") thick would be difficult some chamfer or Vee-Prep would be required. This technique is perfectly feasible for @  ½"   thickness. Please see this online handbook from EASB for more guidance.

 

Thanks.

 

 

Pradip Goswami, P.Eng,IWE
Independent Welding & Metallurgical Engineering Specialist & Consultant.
Ontario,Canada.
ca.linkedin.com/pub/pradip-goswami/5/985/299

pgoswami@quickclic.net

pradip.goswami@gmail.com

H-905-6799677, 905-9631505

C-905-9793232

 

 

http://www.esabna.com/euweb/sa_handbook/585sa2_27.htm

 

---

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Lakshman Kumar B
Sent: Tuesday, March 15, 2016 10:54 AM
To: materials-welding@googlegroups.com
Subject: [MW:24531] RE: 24530] RE: 24528] WPS for SAW

 

Its not for a LSAW, it's for spiral welded pipe, and also its for a water service application not for Oil&Gas,

Lakshman kumar.B
Project manager.
9440031459

---

From: Alan Denney
Sent: ‎15-‎03-‎2016 19:50
To: materials-welding@googlegroups.com
Subject: [MW:24530] RE: 24528] WPS for SAW

Pipe > 20mm manufactured with SAW longitudinal seam has a precisely machined weld preparation. It is not done with a square butt. Are you aiming for a low quality product or one for pressure piping or pipeline service.

 

Alan Denney

AKD Materials Consulting Ltd

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Lakshman
Sent: 15 March 2016 08:21
To: materials-welding@googlegroups.com
Subject: [MW:24528] WPS for SAW

 

Hi friends,

 

I want a WPS (incl PQR) for the following parameters, if anyone is having, please share it, it will help us a lot for me…

 

Material – IS 2062 (or Pno 1)

Thickness – above 20mm.

Process – SAW – (No SMAW, No Tig and etc)

Joint configuration – Square butt, both sides welding.

Application – pipe welding (manufacturing at factory)

 

Thanks in advance for the cooperation.

 

Thanks & Regards,

Lakshman Kumar B,

+91 9440031459.

 

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/001401d17e93%24a8709da0%24f951d8e0%24%40com.
For more options, visit https://groups.google.com/d/optout.

 

This email has been scanned by BullGuard antivirus protection.

For more info visit www.bullguard.com

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/007d01d17ec5%249190fb70%24b4b2f250%24%40denney1.freeserve.co.uk.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/56e82228.61f8420a.6f908.ffffef39%40mx.google.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You rece

[The entire original message is not included.]