Re: [MW:24475] Joint Design

Yeah I accept that ...

On Thursday, March 10, 2016 at 3:47:24 PM UTC+6, gerr...@yahoo.com wrote:

Pradeep,

Normally Weld Bevels are made for below reasons

1. Accessibility (of torch & electrodes)

2. Flowability of the Weld Metal

3. Thermal conductivity of Base Materials ( where thickness also is considered when it changes the flow from 2D to 3D)

As per ASME Sec.IX, joint detail is a non-essential variable and if the above criteria are taken care of welding pipe with V bevel will not have any effect provided you produce sound weld joint without any lack of side wall fusion.

 

Thanks & Regards

J.Gerald Jayakumar

0091-9344954677

---

From: Pradeep Chowdary <mech...@gmail.com>
To: Materials & Welding <material...@googlegroups.com>
Sent: Thursday, March 10, 2016 11:54 AM
Subject: [MW:24457] Joint Design

Dear Experts,

I have an problem regarding with joint design, normally one end of pipe is came with V groove and fittings came with J groove, the thing is can we weld those joints..?? or we have to make J groove in pipe ?? Normally ASME 31.3 it's mentioned about thickness only. Apart from this, i remember that, Joint Desgin is a Non essential variable right??? So guys, shall i proceed for welding??

Please help me out with this issue..

Thanks and Regards,

Pradeep

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/a1a67b6d-b93d-47f0-9bf1-130c1f451684%40googlegroups.com?utm_medium=email&utm_source=footer.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/39e470c3-dd29-4bc0-a25e-6b872590aaa2%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.