[MW:24530] RE: 24528] WPS for SAW

Pipe > 20mm manufactured with SAW longitudinal seam has a precisely machined weld preparation. It is not done with a square butt. Are you aiming for a low quality product or one for pressure piping or pipeline service.

 

Alan Denney

AKD Materials Consulting Ltd

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Lakshman
Sent: 15 March 2016 08:21
To: materials-welding@googlegroups.com
Subject: [MW:24528] WPS for SAW

 

Hi friends,

 

I want a WPS (incl PQR) for the following parameters, if anyone is having, please share it, it will help us a lot for me…

 

Material – IS 2062 (or Pno 1)

Thickness – above 20mm.

Process – SAW – (No SMAW, No Tig and etc)

Joint configuration – Square butt, both sides welding.

Application – pipe welding (manufacturing at factory)

 

Thanks in advance for the cooperation.

 

Thanks & Regards,

Lakshman Kumar B,

+91 9440031459.

 

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/001401d17e93%24a8709da0%24f951d8e0%24%40com.
For more options, visit https://groups.google.com/d/optout.