You won't find a specific para for weave width, other than ASME section 9, relating to your WPS that has been qualified. Maximum weave width shall be as stated in your WPS (welding procedure).
I believe this will be true for other Standards.
Best Regards,
Jim Price | Welding Engineer, CWI
Direct: 320.7463439 | Fax: 417-862-5564
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of simon lawrence
Sent: Thursday, March 31, 2016 5:00 AM
To: Materials & Welding
Subject: [MW:24595] GTAW weld weaving
Pls confirm that Weld weaving width , weld weave maximum how much we can accepted in GTAW process ?
--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/757ab274-8b90-4e73-93a9-35e7c078e57f%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment