Re: [MW:24558] Reg: combination of 2pqr's make a wps

My thinking is QW-200.3(f) when impact test not require.

Must refer to QW-200.4(b) but reading that para, still confuses.

Could anyone suggest more???

Best Regards,

Chandra

On 19-Mar-2016, at 7:00 PM, Lalu Rajendran <lalucpt@gmail.com> wrote:

Hi,

please refer the below extract QW-200.3 (f), and hope this will suffice.

<image.png>

regards,

LALU

On Sat, Mar 19, 2016 at 3:29 PM, Chandra <chandrasekhar.palapala@gmail.com> wrote:

Dear to all,

I would like to ask you about the combination of pqr's

I have PQR A - 8mm (gtaw+smaw)
PQR B - 21.5mm (gtaw+smaw)
Both the pqr's were impact tested

now i want to make a wps using the 2pqr's as the thickness range 8mm to 43mm with impact requirements.

I require suggestions on this. Please give comments n valuable answers

Chandra
Welding Engineer


Best Regards,
Chandra

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/6F07097A-4544-4757-AC19-2334BE4464DD%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOwU13vj%3DhC8sfcUq2sj9GzPjdB79iz%3D0ze3N8UgW%3Dv5G4qBeA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.