| From: Lu, Feng Sent: Πέμπτη, 24 Μαρτίου 2016 - 18:08 To: Meghanadh K Reply To: materials-welding@googlegroups.com Subject: RE: [MW:24572] Reg: combination of 2pqr's make a wps |
If the code governing the job is B31.3, then the qualified range shall be T/2 ~ (T+1/4"). In this specific case, PQR A qualified 4mm ~ 14mm and PQR B qualified 11mm ~ 28mm, so your range shall be 4mm ~ 28 mm.
|
| ||
| Feng Lu, Ph.D. | ||
| ||
| This e-mail may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply e-mail and delete all copies of this message. |
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of George Dilintas
Sent: Tuesday, March 22, 2016 3:14 PM
To: Meghanadh K
Subject: Re: [MW:24570] Reg: combination of 2pqr's make a wps
you can not exceed the base metal thickness qualified with the PQRB
2016-03-19 13:29 GMT+02:00 Chandra <chandrasekhar.palapala@gmail.com>:
Dear to all,
I would like to ask you about the combination of pqr's
I have PQR A - 8mm (gtaw+smaw)
PQR B - 21.5mm (gtaw+smaw)
Both the pqr's were impact tested
now i want to make a wps using the 2pqr's as the thickness range 8mm to 43mm with impact requirements.
I require suggestions on this. Please give comments n valuable answers
Chandra
Welding Engineer
Best Regards,
Chandra
--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/6F07097A-4544-4757-AC19-2334BE4464DD%40gmail.com.
For more options, visit https://groups.google.com/d/optout.
--
Dr. Georgios Dilintas,
Dipl. Ing. In Aeronautic and Space Engineering
Ph.D in Mechanics of Solids - Computational Mechanics
A.I.S, A.N.I, IRCA Lead Auditor
Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis
--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPOi40DiykE1NbBx79%2B3F2Te%2BPe1%2BFEN%2BxgDmOryWHMtp77%3DkA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/BFE5573062A906469F0CB5F594628E1909494F29%40EXCH04.zhi.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment