Hi,
As per ASME B31.3 Edition2014, there is the exception for PWHT for P1 Carbon steel materials. Please see the below extract.
regards,
LALU
On Wed, Mar 23, 2016 at 8:11 AM, Binoy Lonappan <binoypl3@gmail.com> wrote:
Whats the thickness shall be done with PWHT CS material as per B31.3 latest edition .
Here the joint is branch weld of high thickness weldolet with low thickness pipe.BINOY L
--
QC
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKrfo%2BDDp29cSaJxULSRAPbqaYcSRgp%2BXmRzmU76c0XFQJorRg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOwU13tQWAZMSoY5C1OXOqYQYDHrSwnGvHcOuBR6MJc153h4dA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment