As per the attached requirement from B31.3.2014 edition PWHT tequirement .the thickness considered is the lesser of the two parts joining .
Does it means if one of the parent metal is of below 25 mm PWHT not required.?
BINOY L
QC Engineer-Mechanical
AGC.
Project:AFU KKIA Riyadh.KSA
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKrfo%2BAiHibM-vVQhjPMNER%3DLp2ATk1x1Tq7BPO765KxGpA48w%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment