Re: [MW:24566] IGC-Test as per A262 Practice E

Why you don't follow the approach described in ASME BPVC Section VIII-1 / UHA-44?

2016-03-15 7:28 GMT+02:00 Kannayeram Gnanapandithan <kgpandithan@gmail.com>:

Experts comments on the following for any precautionary measured to be taken

Tube Matl--- ASS 316L

 Dimension--- Dia 38.1 X 4.06 mm thick

  R/D ratio=1

Cold bending followed by Solution Annealing ( Water or Air quencing, advice required to choose Air or Water),

Followed by IGC as per A262 Practice E

THANKS & BEST REGARDS,

KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1,

CONSULTANT-WELDING & QUALITY

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eNYprQZ%2BXW2M%3DfAm0kyVLH85zNEo4zLWBR8LXpEqamCow%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--

Dr. Georgios Dilintas,

Dipl. Ing. In Aeronautic and Space Engineering

Ph.D in Mechanics of Solids - Computational Mechanics

A.I.S, A.N.I, IRCA Lead Auditor

Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPOi40AMFqcHN18pGgSkcOXZVEUpwWoNikM_LKnnYF4EiD6KcQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.