you can not exceed the base metal thickness qualified with the PQRB
2016-03-19 13:29 GMT+02:00 Chandra <chandrasekhar.palapala@gmail.com>:
Dear to all,
I would like to ask you about the combination of pqr's
I have PQR A - 8mm (gtaw+smaw)
PQR B - 21.5mm (gtaw+smaw)
Both the pqr's were impact tested
now i want to make a wps using the 2pqr's as the thickness range 8mm to 43mm with impact requirements.
I require suggestions on this. Please give comments n valuable answers
Chandra
Welding Engineer
Best Regards,
Chandra
--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/6F07097A-4544-4757-AC19-2334BE4464DD%40gmail.com.
For more options, visit https://groups.google.com/d/optout.
Dr. Georgios Dilintas,
Dipl. Ing. In Aeronautic and Space Engineering
Ph.D in Mechanics of Solids - Computational Mechanics
A.I.S, A.N.I, IRCA Lead Auditor
Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPOi40DiykE1NbBx79%2B3F2Te%2BPe1%2BFEN%2BxgDmOryWHMtp77%3DkA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
Comments