Re: [MW:24590] Acceptance tolerance as per ASME B31.3

Dear Arun,

During line checking with Pid he rejected most of package due to out of plumbness, straight ness & out of level . I try to find out the acceptance criteria in B31.3 but j did not get any details .

Can you provide me the detail reference documents if you have.

Regards

Sangram 

Sent from my iPhone

On Mar 29, 2016, at 2:32 PM, 'Arun Das' via Materials & Welding <materials-welding@googlegroups.com> wrote:

Hi,

For piping the linear tolerances are to be verified and normally PFI ES-3 will be the reference document other than the requirements on the specification.

If you can explain your problem more clearly may be able to assist you.

regards,

 

Arun S Das

On Tuesday, 29 March 2016 7:23 AM, 'Sangram' via Materials & Welding <materials-welding@googlegroups.com> wrote:

Dear experts

Can some one tell me tolerance for plumbness,straightness & level as per ASME B31.3


Regards
Sangram

Sent from my iPhone

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/D48EFDDD-9007-47BB-AE5C-FB230FC9556A%40yahoo.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/616986417.1578402.1459251150146.JavaMail.yahoo%40mail.yahoo.com.
For more options, visit https://groups.google.com/d/optout.