Re: [MW:24533] IGC-Test as per A262 Practice E

I have mostly seen Tube manufacturers follow water quenching after Solution Annealing.

Only care you can take is ensure chloride content of water upto 25ppm max. and water quenching to be done immediately and should not exceed more than 3 minutes after SA.



PREM S NAUTIYAL
CELL : 9769316004


From: Kannayeram Gnanapandithan <kgpandithan@gmail.com>
Sent: Tue, 15 Mar 2016 11:19:25
To: materials-welding <materials-welding@googlegroups.com>
Subject: [MW:24527] IGC-Test as per A262 Practice E

Experts comments on the following for any precautionary measured to be taken

Tube Matl--- ASS 316L

 Dimension--- Dia 38.1 X 4.06 mm thick

  R/D ratio=1

Cold bending followed by Solution Annealing ( Water or Air quencing, advice required to choose Air or Water),

Followed by IGC as per A262 Practice E

THANKS & BEST REGARDS,

KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1,

CONSULTANT-WELDING & QUALITY

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eNYprQZ%2BXW2M%3DfAm0kyVLH85zNEo4zLWBR8LXpEqamCow%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Get your own FREE website, FREE domain & FREE mobile app with Company email.

Know More >

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1458020965.S.11195.6803.f4-234-246.1458063269.17756%40webmail.rediffmail.com.
For more options, visit https://groups.google.com/d/optout.