Experts comments on the following for any precautionary measured to be taken
-- Tube Matl--- ASS 316L
Dimension--- Dia 38.1 X 4.06 mm thick
R/D ratio=1
Cold bending followed by Solution Annealing ( Water or Air quencing, advice required to choose Air or Water),
Followed by IGC as per A262 Practice E
THANKS & BEST REGARDS,
KG.PANDITHAN, IWE, AWS-CWI, CSWIP 3.1,
CONSULTANT-WELDING & QUALITY
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eNYprQZ%2BXW2M%3DfAm0kyVLH85zNEo4zLWBR8LXpEqamCow%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment