Re: [MW:24554] Is Sensitive leakt test / Pneumatic Test can be considered as Substitute.

Normally Shop made Piping spools are not leak tested inspite of RT done but it will be done at site. So noway RT can replace leak test??

THANKS & BEST REGARDS,

KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1,

CONSULTANT-WELDING & QUALITY

On Sat, Mar 19, 2016 at 4:29 PM, Lalu Rajendran <lalucpt@gmail.com> wrote:

Hi,

If RT s not possible, please go for alternate NDE methods such as UT upon your client's approval. We cannot say a joint is sound if it has survived the pressure/leak test. 

regards,

LALU

On Sat, Mar 19, 2016 at 8:07 AM, <pkkanishk2006@gmail.com> wrote:

Dear Members ,

Please clarify that whether in any circumstances we could substitute RT with pressure / any leak test for services where RT is been included as a inspection method.

Regards

Pratish

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/f63a3157-92e6-4f84-aa59-22332c4a67c0%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOwU13vXOVaRV%2B16vKfKxebZuGqp8_99o03f5%2B51q1bDGbNDiA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eOscQDvQyxKHreoKTkOr2EKd3twdPvaPSQvxdWPPp510A%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.