Dear Rajesh,
My confusion, impact test is required for welding procedure qualification as per UHA-51(e) and weld metal (UHA-51f) also. Only base metal and HAZ is exampted as per UHA-51. if welding procedure required impact test then we need to have PTC for the job as per UHA-51 h..
Am i right or UHA-51 saying somthing different. please confirm...
Regards
Vijay Katkar
On Thu, Nov 24, 2011 at 6:41 AM, <Rajesh.Patel@linde-le.com> wrote:
Dear Vijay
If welding is performed with the use of filler material up -196 deg C, Production Test Coupan is not required.
for PTC requirements refer UHA 51 h
Best Regards
Rajesh Patel
Executive Engineer - Materials Technology, QA/QC & Standards
From: Vijay Katkar <katkar.vijay22@gmail.com>
To: materials-welding@googlegroups.com
Date: 23-11-11 21:44
Subject: [MW:13040] PTC Requirement for S.S.
Sent by: materials-welding@googlegroups.com
Dear All,
I have one vessel with M.D.M.T -140 Degree C. for base metal (SA 240 TP 304) impact test is exampted as per UHA 51 Of ASME section VIII Division- 1 but consumable and procedure qualification impact test is required as UHA-51 ,
PTC is required for vessel with above condition, please advice .........
Regards
Vijay Katkar--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Comments