dear bala ,
-- it is mention as per the drawing symbol you have to make an bevel on arrow side & followed by fillet joint .
the bevel will be through thickness of the web.
regards
dinesh
On Wed, Nov 23, 2011 at 3:24 AM, bala krishnan <balakrishnanr1@yahoo.co.in> wrote:
--Dear experts ,here i attached weld joint detail.please advise me regard about weld joint configuration.friendly,bala
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment