Re: [MW:27597] Use of SA240 TP 304 WPS to weld SA240 TP 316

If you are working with ASME IX and both materials are P8, you can use the same WPS without problems, but verify that two data first.

2018-03-30 8:05 GMT-06:00 chiluka venkatramulu <ramuluchiluka@gmail.com>:

Dear All,

Pl clarify the below.
Can I Use SA240 TP 304 WPS to weld SA240 TP 316 material

   OR

Shall I need to prepare other WPS  based on the above PQR

With best wishes,

Venkat

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--

Ing. José Juan Jiménez Alejandro

Soluciones en Soldadura e Inspección

Cel. 812 352 4606

Skype: jjjimeneza

Twitter: @jjjimeneza

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.