Re: [MW:27557] Re: If a welder is qualified with SS (Stainless Steel) GTAW, He can weld CS Carbon steel GTAW?

For welder A no is not essential??

On Sat 24 Mar, 2018 5:12 pm Vairamuthu, <vaira.muthu.78@gmail.com> wrote:

As Mr. Chandra is clearly said the welder can't weld in CS as code very clear on this and very nicely explained by Chandra Ji. which is copied below. 

Dear Team,

 Both the carbon and stainless steel filler metals 

Fno. is 6.

Refer QW-404.15 (A change from one F-no in table

Qw-432 to any F-number or to any other filler

metal, except as permitted in Qw-433.

Qw-433 table says qualified with any F.no6 qualified 

For all F-No 6 [refer note1]

Note1 says: deposited wels metal made using a 

bare rod not covered by an SFA specification

but which conforms to an analysis listed in 

Table QW-442 shall be considered to be classified

As F-no 6.

Means carbon steel F.No 6 (but A.No is 1)

 Stainless steel F.No 6 (but A.No is 8)

So, even F.no same but weld metal analysis is

different. So he was not qualified to weld stainless

Best Regards,

Chandra

On Saturday, February 24, 2018 at 1:03:47 PM UTC+3, PK wrote:

Dear Sir,

If a welder is qualified with SS (Stainless Steel) GTAW,  He can weld CS Carbon steel GTAW? Need code Referance...

Thanks.

PKM

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.