Friday, March 9, 2018

Re: [MW:27483] UT in lieu of RT B31.1 / sec 1

Code case available for use of UT 

On Fri 9 Mar, 2018 11:30 am Raghuram Bathula, <raghurambathula@gmail.com> wrote:
ASME B31.1  - for power piping has written and adopted requirements in the body of the Code to allow for the use of either UT or RT for volumetric examinations (refer table 136.4)

For ASME BPV Sec 1, Unless Table PW-11 restricts volumetric examination to one method, either the radiographic or the ultrasonic method may be used.


On Fri, 9 Mar 2018 at 09:08, 'anand gupta' via Materials & Welding <materials-welding@googlegroups.com> wrote:
PAUT is the option now days to do NDT inplace of RT in pipe or any, and it is thk 8 mm and above. 

A p gupta
IOCL BARODA


On Wed, 7 Mar 2018 at 8:22 AM, pradip kumar Sil
Dear Everybody,
Can we perform  UT on the pipe joints as per ASME Sec 1 or B31.1 instead of RT.
Pls clarify with code references.
Thanks in advance
Regards
Pradip


--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...