I do not understand, why is it not retain properties after PWHT of F65 forgings?
Most of F60 or F65 materials are supplied in Q&T condition with tempering at 540 Deg. C as per ASTM A694, unless you specifically asked for tempering temperature of at or above 660 Deg. C since it has to be stress relieved at 650 Deg. C. Unless you specify in PO specification, vendor will not supply with above condition and hence you cannot stress relieve F65 materials with 650 Deg. C.
If F65 is delivered with tempering temperature of >660 Deg. C then obsoletely you can use it with stress relieving. All these conditions shall be included in the PO specification and it can be available in the market.
Regards,
L. Prabhu kumar
Ph. no. 9003010978/ +968 95202761
From: N VENKATESWARA PRASAD <weldengr.velosi@gmail.com>
Sent: Wed, 14 Mar 2018 19:22:18
To: materials-welding <materials-welding@googlegroups.com>
Subject: [MW:27517] ASTM A 694 F 65 FLANGES
Hi Experts,
We are using ASTM A 182 F 22 materials in sub sea tree parts. These forgings needs to be welded to ASTM A 694 F 65 pup pieces. We need to do PWHT at 650 deg. C for 6 hours. The F 65 forgings can not retain the properties due to PWHT. Hence we are doing buttering the F 22 and carrying out PWHT and then welding to F 65 forging with out PWHT.
I am looking for supplier who can provide the F 65 forgings which can retain its properties with PWHT. It shall meet the the mechanical properties including hardness ( 250 Hv10) in the as welded and PWHT condition also. This will give more savings as we are avoiding buttering.
Please share if your have any details on it.
Regards
Prasad
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment