RE: [MW:15138] P-T Curves

 

Pressure-Temperature (P-T) operating curves are required to ensure safe operation of pressure vessels.

 
The code governing the calculation of P-T curves:
 

Federal Regulations (CFR),
ASME Boiler and Pressure Vessel Code
Nuclear Regulatory Commission (NRC) Regulatory Guides.

 
The pressure vessel for testing and operational conditions are specified in Section IV of 10 CFR 50, Appendix G  and  Appendix G to Section III of the Code.  
 
Pressure-Temperature (P-T) operating curves are required to ensure safe operation of pressure vessels.

Thank & Best Regards,

 

M Veera SAMY- Bureau Veritas.

Coimbatore

 

 

 

---

From: himannikdin@gmail.com
Date: Sun, 26 Aug 2012 20:25:20 +0430
Subject: [MW:15133] P-T Curves
To: materials-welding@googlegroups.com

Dear Experts

Would you please share some information/references regarding P-T curves in pressure vessels?

Regards,

Himan Nikdin

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.