Re: [MW:15061] HYDRO TEST

Dear Sampath,

 

                         if air locks while testing you will not get required pressure constantly, automatically pressure will drops while holding time. Reason behind is this while pumping the water may be relief valve not opened. you should release the pressure relief valve for some time to exit the air while pumping the water.

 

 

I hope this will hepls you.

 

 

On Sat, Aug 11, 2012 at 6:26 AM, Sampath Kumar <skthatham@gmail.com> wrote:

Dear Experts,

 

 

During Hydro Test if air gets locked[Air Lock] [1] what will happen? [2]What is the reason for air lock?[3]What is the precautions one has to take to avoid?pls explain.

 

Thanking you all

 

With Best Regards

 

sampath

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
 
 

--

Regards,
Padmanabha raju K
0097433459508                                  
Please consider the environment before printing this email

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.