Sunday, August 12, 2012

[MW:15073] Fw: Aluminium Bronze weld overlay on P-1 Base metal.

Dear Experts,
 
I need your experts' opinion at the earliest.
 
Thanks & regards,
 
 
C. R. GANDHI

--- On Sun, 7/29/12, CHINTUKUMAR GANDHI <cgandhi1975@yahoo.com> wrote:

From: CHINTUKUMAR GANDHI <cgandhi1975@yahoo.com>
Subject: Aluminium Bronze weld overlay on P-1 Base metal.
To: materials-welding@googlegroups.com
Date: Sunday, July 29, 2012, 11:26 AM

Dear Experts,
 
Good day,
 
In one of our Job, requirement is Aluminium Bronze weld overlay on P-1 Base metal + PWHT. Weld deposit thickness is 3 to 5 mm. I shall have to qualify Welding Procedure in accordance with ASME Sec. IX using TIG manual process.
Which care shall I have to exercise during welding procedure qualificaiton regarding Initial Cleaning, Inter pass cleaning, Preheat temp., Inter pass temp., Post heating and PWHT Cycle (including H.R., Soaking Temp., Time and C.R.)? Further, the iron dilution should be restricted to 2.5% (maximum) in the finished undiluted layer.
 
Please suggest me the correct welding procedure to meet the requirements.
 
Thanks & regards,
 
 
C. R. GANDHI 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
 
 

No comments:

[MW:35346] Cast-iron welding

Any advice for cast iron welding Sent from Yahoo Mail for iPhone