Materials & Welding: Re: [MW:28114] criteria for ASTM G 28

Tuesday, July 24, 2018

Re: [MW:28114] criteria for ASTM G 28

Hi,

You should check client spec and most of the standards give the requirements as 0.9mm/year.

On Mon, Jul 23, 2018 at 9:07 AM, Ali Asghari <asgharialigl@gmail.com> wrote:

Dear Shyamal.
unfortunately in my project specification referred to ASTM G28.
Do you have any access to reference documents that addressed in the document?and would you say in your project spec how much specify to corrosion rate of G28?

Regards

On Sunday, July 22, 2018 at 9:07:51 AM UTC+4:30, shyamal das wrote:

Hi,

Acceptance criteria depends upon the project specifications

Kr

Shyamal

On 10 July 2018 at 17:15, Ali Asghari <asghar...@gmail.com> wrote:
Dear All.

Does anybody have any documents that said about criteria for ASTM G28 OF INCONEL CLAD?

Regards

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.