[MW:28046] RE: 28045] Enquiry about lower shell MPI while replacing Annular Plate in storage tank

What's the design code? Is there any additional requirement such as clients' specifications.

MPI & LPI are often interchangeable for determination of surface defects.

 

Thanks.

P.Goswami.P.Eng, IWE.

Welding & Metallurgical Specialist

Linkedin: https://www.linkedin.com/in/pradip-goswami-2999855/

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of tahir alam
Sent: July 9, 2018 11:21 PM
To: materials-welding@googlegroups.com
Subject: [MW:28045] Enquiry about lower shell MPI while replacing Annular Plate in storage tank

 

Dear experts 

 

We have contract of tank maintenance in Kuwait. While replacing annular plate inspection ask to do DPT of 2 inch of shell plates. In another refinery they are agree to do MPI only while replacing the annular plates. kindly guide me which one is mention in code. If specifically mention in code then pls send me code detail also.

Best Regards

Tahir Alam

Planning Engineer
Agam Tank Maintenance Group
Mobile : +(965)5150-1509

--------------------------------------------------------------------------------

Site Office : +(965)2388-3614
Head Office : +(965) 2398-5381l2
Fax : +(965) 2398-8312
P.O.Box : 9390 Ahmadi, 61004 Kuwait
Email : tahiralam007@gmail.com
Website : www.agamltd.com

-------------------------------------------------------------

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.