Dear Kanna,
As per my knowledge its acceptable but Kindly as supplier for Radiography (RA) with X-Ray Report and NDT test Certificate.
let me know if you have any quarry.
Regards and Thanks,
Hushikesh Joshi
+918460114486
On 13 July 2018 at 00:35, SRINI <kanna.qc@gmail.com> wrote:
--Dear AllPlease find the attached photos below.This type of welds is acceptable in pressure vessel.Stiffner to nozzle weld was fallen on nozzle to flange welding.. could please advice.VESSEL AS PER ASMERegardsKanna
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
Visit this group at https://groups.google.com/group/materials-welding .
For more options, visit https://groups.google.com/d/optout .
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment