Saturday, July 28, 2018

[MW:28145] Pressure vessel tolerances

Dear Experts,

Please help me to explain this requirement : "C- Rectitude of the generatrix: whatever part of a cylinder generatrix with 6.5 mm in length shall range within 2 x 6.5 mm spaced lines both parallel to the centreline". I have not fully understand. Thank you.




Gigi
--




--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

No comments:

[MW:35614] Re: SS FILLER

dear , pl check A number and Gas composition use for ss cant be sutibale same % for duplex., u need to qualified with aditional testing of f...