Re: [MW:28095] USE OF ELECTRODE

you can use but not reverse if impact was done

THANKS & BEST REGARDS,

KG.PANDITHAN, BE, IWE,  AWS-CWI, CSWIP 3.1,

CONSULTANT-WELDING & QUALITY

Mobile no: +919940739349

On Tue, Jul 17, 2018 at 8:39 PM, Hasin Shaikh <hasin.shaikh@gmail.com> wrote:

Dear All

I have query about use of Electrode with change og classification 

We have WPS for SMAW welding process for P1 material with the E 7018 electrode in that case can we use in production E7018-1 electrode 

Please help me out in interpretation

QW 404.12 (e) from a classification that requires toughness testing

to the same classification which has a suffix which indicates

that toughness testing was performed at a lower

temperature or exhibited greater toughness at the required

temperature or both, as compared to the classification

which was used during procedure qualification (i.e., a

change from E7018 to E7018‐1)

--

*With Regards
Shaikh.Hasin
Email: hasin.shaikh@gmail.com
Mobile: +91-9924562942*

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.