but sr asme sec 2 part A table 200 give info that accepted edition for sa516 gr70 is upto only 2010 .except 2017 edition i can only use edition upto 2010.
On 14 Jul 2018 1:03 p.m., "Prasad Ghanekar" <prsgne@gmail.com> wrote:
Yes.You need to compare with 2017 edition, if found fulfilling all mandatory requirements then you have to recertify as 2017.On Sat, 14 Jul 2018 11:25 Souravbohray, <ermechsouravbohray@gmail.com> wrote:can i use raw material based on asme sec 2 part A edition 2015 even asme 2017 edition already publishedYou received this message because you are subscribed to the Google Groups "Materials & Welding" group.
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to a topic in the Google Groups "Materials & Welding" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/materials-welding/XwdP_oqBRaY/unsubscribe.
To unsubscribe from this group and all its topics, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment