Variables mentioned in table are applicable to specific process only.
Same shall not be applied to other process.
In your case same is not applicable. Need to qualify WPS.
Regards,
CH V RAMANA
BVIL
On Tue, 10 Jul 2018 at 7:11 p.m., Patel Vivek<vivekpatel1303@gmail.com> wrote:In code it's given for EBW...my process is GTAW+SMAW...--On Tue, Jul 10, 2018, 4:39 PM venkat chikkala <venkat_chikkala@yahoo.co.in> wrote:Witch process.
On Tue, 10 Jul 2018 at 6:48 p.m., Patel Vivek<vivekpatel1303@gmail.com> wrote:Background : PQR qualified on coupon : 10.97 mmWPS Qualified : 10.97- 21.94 mm(impact)As per QW-451, WPS qualified up to 21.94 mm. Can we used that WPS for 24.00 mm Thickness. grove weld by considering Qw-403.3, : increase in 20 % in base metal thickness when the test coupon thickness is less than or equal to 25 mm.Regards,Vivek PatelCon. :- +966-0550985053E-mail ID : vivekpatel1303@gmail.com--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment