Dear Experts,
-- Need your suggestions/feedback for developing PQR /WPS for the following:-
Wet crude Sour service pipeline , ASME B31.4/31.8 , API 5 L Gr X60 ,ISO 15156 ,PSL2 , 24" ,12.7MM thickness, ASME Sec IX/API 1104 , Temperature range 0 to 90' C
My quarry:-
1)As per the applicable Aramco Standard ( SAES-W-012) , for Manual Welding process PQR can be qualified to either ASME SEC IX or API 1104, but many are insisting to use API 1104 to qualify as it is a pipeline . So kindly advise
2) Impact test required?
3)Suggested Welding Consumables for a) SMAW only b) GTAW & SMAW
4)Contractor is insisting for all pass Downhill welding using cellulosic electode E7010 for all passes,to avoid baking and storage requirements of Low hydrogen electrode(E7018).Is it possible ?
5)Hardness required for PQR?
6)Can this PQR be used for welding API 5L Grade B joints, without re-qualification?
Apologize for the lenghty quarry, waiting your valuable reponses.
Thank you
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment