Dear,
As it is NON essential Variable. but is there any range/ limit up to which i can joint design?
On Wed, Jul 11, 2018 at 5:46 PM 'Rajesh Kasvala' via Materials & Welding <materials-welding@googlegroups.com> wrote:
Joint design non essentials veriable--
On Wed, Jul 11, 2018 at 4:20 PM, JAY<jay0000.jp@gmail.com> wrote:Dear Team,--I have some question in my mind regarding WPS/PQR/WPQ Qualifications. Explain below.1. I have qualified wps with(SAME SEC IX)-Materials : SA 240 GR 316L TO SA 240 GR 316L (P8 G1 TO P8 G1)Process : GTAW.(with back gauge)Thickness: 8 mm to 8 mm.Root gap: 1.6 mmNow my question is about root gap qualification,If i qualify WPS with above parameters having root gap 1.6.The range qualification of thickness is 4 to 16 mm. likewise is there any range for Root gap qualification?YOUR ASSISTANCE IN THIS MATTER WOULD BE GREATLY APPRECIATED.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment