For wind tower production Oerlikon has specially designed OP 139
With kind regards,
Erwin GERING
Van: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] Namens hakan sitem
Verzonden: dinsdag 20 april 2010 23:08
Aan: materials-welding@googlegroups.com
Onderwerp: Re: [MW:4908] RE: 4421] Hispeed fluxes for SAW WELDING
Regarding to SAW using during wind tower production, you can try Esab OK 1072 flux combination together with your wires which is already presented to be used in wind tower production.
Bu e-posta, Turkcell BlackBerry ile gönderilmiştir.
From: bcube bcube <bcubebcube@gmail.com>
Date: Tue, 20 Apr 2010 20:53:36 +0530
To: <materials-welding@googlegroups.com>
Subject: Re: [MW:4901] RE: 4421] Hispeed fluxes for SAW WELDING
Dear gary,
now we are using the Lincoln Electric P223 flux , to weld the wind mill towers , but during welding we experience the following
1. uneven weld bead
2.excess reinforcement
3.bad cosmetic look
if decrease the amps to get good cosmetic look , during ut inspection the weld soundness fails. can you recommend a parameter for welding
Note:
the thickness range is 8mm to 20mm , we are practising square but welding .
On 3/5/10, Gary_Konarska@lincolnelectric.com.sg <Gary_Konarska@lincolnelectric.com.sg> wrote:
Depending on application:
Lincoln Electric 780 flux
Lincoln Electric P223 flux
Lincoln Electric 781 flux
Lincoln Electric SPX 80
Etc.
From: "GERING, Erwin" [Erwin.GERING@airliquide.com]
Sent: 03/05/2010 08:48 AM CET
To: <materials-welding@googlegroups.com>
Subject: [MW:4435] RE: 4421] Hispeed fluxes for SAW WELDING
Depending on application:
Oerlikon OP F55
Oerlikon Uniflux D1
Oerlikon OP 191
Etc…
With kind regards,
Erwin GERING
Van: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] Namens bcube bcube
Verzonden: donderdag 4 maart 2010 16:39
Aan: materials-welding@googlegroups.com
Onderwerp: [MW:4421] Hispeed fluxes for SAW WELDING
Dear all,
Can any one sent me the details releated to the Hi speed fluxes used for SAW welding .
Reg,
RBG
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment