Re: [MW:4925] Re-Certifying Material

Wrong! See ug-10 or Pg-10 depending on code section

---

  From: "Bathula Raghuram (Mumbai - PIPING)" [R.Bathula@ticb.com]
  Sent: 22/04/2010 02:37 MST
  To: "materials-welding@googlegroups.com" <materials-welding@googlegroups.com>
  Subject: RE: [MW:4920] Re-Certifying Material

You can prepare a comparison table of all chemical and mechanical properties for both grades and get it certified by AI (one such table is attached for ref)

---

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Ramesh Barot
Sent: Thursday, April 22, 2010 2:34 PM
To: Materials Welding
Subject: [MW:4919] Re-Certifying Material

Dear All,

 

Pl.give me detailed procedure for re certifying material?

 

Example 1)ASTM to ASME

              2)AISI to ASME/ASTM

              3)ASME to ASME (Different edition)
 

Thanks,
With Best Regards,
Ramesh Barot