In my Org we are doing in house calibrationwith written procedure, but lifting block weight is certified by third party. Regards, S.Senthilkumar
--- On Mon, 19/4/10, Nishad AK <nishadamk@gmail.com> wrote:
From: Nishad AK <nishadamk@gmail.com>
Subject: Re: [MW:4871] Calibration of MPI yoke and validity.
To: materials-welding@googlegroups.com
Date: Monday, 19 April, 2010, 2:37 PM
My question is on validity of the MPI instument say for the purpose of project is valid only if that posess a Calibration certificate by a TP agency.or otherwise is acceptable. On Mon, Apr 19, 2010 at 12:54 PM, Bathula Raghuram (Mumbai - PIPING) <R.Bathula@ticb.com> wrote: In house is acceptable with a written calibration procedure. Permanent magnet type shall be calibrated ( check magnetic power) prior to use on daily base, and electromagnetic type on yearly basis. Good day, I have a query regarding the calibartion of MPI yoke both Electomagnetic & permanent magnetic type. Does that should hold a Valid calibration certificate by the Third party calibration body or is that ok it has the manufactures certificate showing the weight lifting capacity and other test results.
--
Thanks and Regards
Nishad AK
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-- Thanks and Regards Nishad AK -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Comments