The specification calls for testing at pressure which shall create hoop stress equivalent to the material SMYS (30 kpsi in this case).
To create this hoop stress, the pipe of this schedule need to be tested at 7492 psi only. (formula P = 2xsxt/D)
Sanjeevan
----- Original Message -----From: smruthi mohanSent: Sunday, April 25, 2010 6:14 PMSubject: [MW:4952] Acceptability of Inconel pipe.
Hi Dear friends,
Please anybody help me for the below,
For our new ASME job, we need inconel materials and we are not so familiar with this. We checked three test certificate from different supplier for inconel 625 (3" Sch160, smls) pipe and here all hydrostatic test is conducted at 8829 psi. But as per ASME Section II, Part B, ED 07, Add08 hydrostatic test pressure shall be 30000psi for SB444, UNS N06625, Gr.1 material. So please advise me that anyway we can accept material having the preesure test value of 8829 psi.
And also please explain what is allowable fiber stress and from where we get values of allowable fibre stress for this material.
Thanks & Regards,
SMRUTHI MOHAN
ENGINEER - MATERIALS
QICL, FUJAIRAH
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment