We used e309t1-1
Gửi từ điện thoại thông minh BlackBerry 10.
| Từ: george.dilintas@gr.bureauveritas.com Đã gửi: 0:57 Chủ nhật, ngày 10 tháng năm năm 2015 Đến: nguyen tuan Trả lời đến: materials-welding@googlegroups.com Chủ đề: Re: [MW:23247] Cracking on bending test |
What type of filler metal did you use
Sent from my BlackBerry 10 smartphone.
| From: nguyen tuan Sent: Σάββατο, 9 Μαΐου 2015 - 07:23 To: materials-welding@googlegroups.com Reply To: materials-welding@googlegroups.com Subject: [MW:23236] Cracking on bending test |
Hi All
-- We have bending test for PQ (welding process FCAW , Material CS to stainless steel ) result was fail (cracked). But We check PT can't find cracking .
Do somebody have same problem . what is conclusion .
Thanks you
Tuan
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/a35ad4f0-c336-479f-bfff-6d0f63a8100d%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/20150509175733.6443092.17956.5787%40gr.bureauveritas.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment