Dear Mohammed Ghani,
please refer ASME SEC-9 para QW-202.2(C) and QW-451.4
Best Regards:
Gulzar Ali
Mob: 00964-7729203068 (IRAQ )
Mob: 0092-333-2833894 (Roaming )
On Thu, May 21, 2015 at 1:01 PM, Mohammed Ghani <ghani386@gmail.com> wrote:
Dear Experts,--Can any one suggest if Groove welding WPS will also allow welding with fillet. please guide with reference standard clause.--Thanks and Regards, ?
Mohammed Ghani,CSWIP 3.1 / BGAS L-2 / ISO 9001:2008 QMS LA.Mechanical Inspector,BUREAU VERITAS.
ü Please consider the environment before printing this email."Be the change you wish to see in the world"
---Mahatma Gandhi---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAG7AWVjjPwZ%2BkvBBQ-mQ1p1XV0tjtSv4jh8vqu-icwtVMpD%2B7g%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAH%2BZiM8JJNMbk2Y2LhybhmEOkhgwP0EZzc%3DktoKyTVKq-MhqRA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
Comments