Specify standard to be followed.
On Wed, May 27, 2015 at 4:21 PM, Bas Kar <baskarmech15@gmail.com> wrote:
Dear Expects,--
Here we are using coil material is A335GrP11. This coil have stiffener support material is A560 50Cr50Ni Alloy Material.
Coil material Thk is 6.55 and Support material thk is 22 mm...
The welding position comes Double Bevel with 3G Position. Our client told how we conduct the PQT and How many Sample Piece required.
Give your valuable suggestions.
Thanks & Regards
Baskar P
Ph :- +91 9944876002
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/e20ecd7f-40f1-4064-b87d-f0a36268ec62%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
G.Gopalakrishnan
Welding Engineer
Mukand Ltd
Mumbai
Moble :+91-9833397917
Welding Engineer
Mukand Ltd
Mumbai
Moble :+91-9833397917
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOp_kKjRH2qWDOrdtrd3aL3yomN3mCOeoZTYY2eJTQvhb4EmPA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment