Re-certified no but checked for compliance with applicable edition and addenda yes
Sent from my BlackBerry 10 smartphone.
| From: New91 Sent: Πέμπτη, 7 Μαΐου 2015 - 20:07 To: materials-welding@googlegroups.com Reply To: materials-welding@googlegroups.com Subject: [MW:23228] ASME UG-10 interpretation |
Reviewing a material test report (MTR) of SA-516-70 certified as per ASME 2010 Ed 2011àddenda and MTR complies with all the requirements. The Job is to be U stamped per ASME 2013 ED. Theres no requirement of materials to be certified to làtest code editions in contractual documents. Since job is to be code stamped per 2013 Ed, should material also be recertified as per ASME 2013 Ed? -- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com. To post to this group, send email to materials-welding@googlegroups.com. Visit this group at http://groups.google.com/group/materials-welding. To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/ea56d2f0-37bb-467e-b738-5edb4b826c44%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment