Tuesday, May 12, 2015

Re: [MW:23273] ASME UG-10 interpretation

Nothing can be certified or accepted unless it complies with code. 

Rgds
G.Prakash
AIS, AIA LLC TX, USA
Tel: +9714 2778511 Mob:+97152 979 5678

On Fri, May 8, 2015 at 2:01 PM, <george.dilintas@gr.bureauveritas.com> wrote:

No, you reject it, unless you can perform tests which will demonstrate compliance with new Code Edition and Addenda.
You can not certify anything which is not in compliance with the Code
This is not the meaning of UG-10.
You can certify a material, using UG-10, which was not tested & certified & identified by the manufacturer in accordance with the Code, but it is complying with the Code. This is the meaning of UG-10
best regards

Dr. Georgios Dilintas

Authorized Nuclear Inspector
Authorized Inspector Supervisor

I&F REGIONAL TECHNICAL MANAGER
BUREAU VERITAS PIRAEUS - GREECE

Tel: +30 210 40 63 113 /4 /5
Fax: +30 210 40 63 118
Cell: +30 69 44 64 62 04


Makrand Sakpal ---08/05/2015 11:04:46---But suppose in case if material is not complying with latest code edition  then what to do? Re-certi

From: Makrand Sakpal <makrands9@gmail.com>
To: materials-welding@googlegroups.com
Date: 08/05/2015 11:04
Subject: Re: [MW:23233] ASME UG-10 interpretation
Sent by: materials-welding@googlegroups.com





But suppose in case if material is not complying with latest code edition then what to do? Re-certification?

On Friday, 8 May 2015 07:55:56 UTC+5:30, George Dilintas wrote:

Re-certified no but checked for compliance with applicable edition and addenda yes

Sent from my BlackBerry 10 smartphone.

Reviewing a material test report (MTR) of SA-516-70 certified as per ASME 2010 Ed 2011àddenda and MTR complies with all the requirements. The Job is to be U stamped per ASME 2013 ED. Theres no requirement of materials to be certified to làtest code editions in contractual documents. Since job is to be code stamped per 2013 Ed, should material also be recertified as per ASME 2013 Ed?

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
materials-weld...@googlegroups.com.
To post to this group, send email to
material...@googlegroups.com.
Visit this group at
http://groups.google.com/group/materials-welding.
To view this discussion on the web visit
https://groups.google.com/d/msgid/materials-welding/ea56d2f0-37bb-467e-b738-5edb4b826c44%40googlegroups.com.
For more options, visit
https://groups.google.com/d/optout.


This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com 

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to
materials-welding@googlegroups.com.
Visit this group at
http://groups.google.com/group/materials-welding.
To view this discussion on the web visit
https://groups.google.com/d/msgid/materials-welding/53605932-9a1a-47f4-bb9a-c1e5faece7f3%40googlegroups.com.
For more options, visit
https://groups.google.com/d/optout.

This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/OF0536A472.3E816905-ONC2257E3F.0036A736-C2257E3F.0037073B%40LocalDomain.

For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOUP4qKqroEK_qyAweYUU7u9uHasE4RcQ-KxL5%3D11E7hzC%2BRAw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...