Sunday, May 31, 2015

[MW:23048] Re: Local PWHT of butt welds in piping

Alan 
thanks .We intend to follow B 31.1 POWER PIPING CODE AS FABRICATION CODE IS ASME B 31.1



On Tuesday, May 26, 2015 at 10:19:30 AM UTC+5:30, Vishwas Keskar Welding Manager Pune India wrote:
For long piping(Carbon steel, alloy steel), butt welding of large diameter(219mm OD TO 606mm OD, THK - 18.26mm to 42 mm )pipes is carried out. 
For PWHT of these butt welds, what are the parameters shall be considered for effective PWHT?

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/4a044795-1847-4745-a576-efbc881ee423%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...