So, if this filler metal was used correctly there would be no hot cracks there.
Please try to measure hardness in the area of cracks and compare with those of base metals
best regards
Dr. Georgios Dilintas
Authorized Nuclear Inspector
Authorized Inspector Supervisor
I&F REGIONAL TECHNICAL MANAGER
BUREAU VERITAS PIRAEUS - GREECE
Tel: +30 210 40 63 113 /4 /5
Fax: +30 210 40 63 118
Cell: +30 69 44 64 62 04
tuanpvecc---10/05/2015 06:50:17---We used e309t1-1 Gửi từ điện thoại thông minh BlackBerry 10. Từ: george.dilintas@gr.bureauveritas.
From: tuanpvecc@gmail.com
To: "george.dilintas@gr.bureauveritas.com" <materials-welding@googlegroups.com>, nguyen tuan <materials-welding@googlegroups.com>
Date: 10/05/2015 06:50
Subject: V/v: [MW:23258] Cracking on bending test
Sent by: materials-welding@googlegroups.com
We used e309t1-1
Gửi từ điện thoại thông minh BlackBerry 10.
Đã gửi: 0:57 Chủ nhật, ngày 10 tháng năm năm 2015 Đến: nguyen tuan Trả lời đến: materials-welding@googlegroups.com Chủ đề: Re: [MW:23247] Cracking on bending test |
What type of filler metal did you use
Sent from my BlackBerry 10 smartphone.
Sent: Σάββατο, 9 Μαΐου 2015 - 07:23 To: materials-welding@googlegroups.com Reply To: materials-welding@googlegroups.com Subject: [MW:23236] Cracking on bending test |
Hi All
We have bending test for PQ (welding process FCAW , Material CS to stainless steel ) result was fail (cracked). But We check PT can't find cracking .
Do somebody have same problem . what is conclusion .
Thanks you
Tuan
--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/a35ad4f0-c336-479f-bfff-6d0f63a8100d%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com
--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/20150509175733.6443092.17956.5787%40gr.bureauveritas.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/20150510034012.4399182.72837.4428%40gmail.com.
For more options, visit https://groups.google.com/d/optout.
This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com
No comments:
Post a Comment