Re: [MW:23242] TESTS REQUIRED FOR PQR OF CORNER JOINT WITH SINGLE GROOVE WELD

For sec IX it is not required. For AWS D 1.1 it is required.

Thanks & Regards
Muhammed Ibrahim PK

On 7 May 2015 at 15:34, vikas shelke <vikas.shelke84@gmail.com> wrote:

Hello everyone,

    I have to qualify EN3A Plate to SA 106 Gr B Pipe Corner joint with single J Groove outside

.

Will you please suggest the TESTS required for the qualification of Procedure as per ASME Sec IX;

    

--

 
 Regards,

   Vikas 

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALmPzdUGSyoZAkzZS51h3S5Q2CkwXzYEUh-rih%3Df%3DgtUFzTE2A%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALOPgmO3PEeP2CjWQ%2B5mOkOdA1mHNSCSyAqBMOtUMRL-nmNXWg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.