Materials & Welding: Re: [MW:23240] TESTS REQUIRED FOR PQR OF CORNER JOINT WITH SINGLE GROOVE WELD

Friday, May 8, 2015

Re: [MW:23240] TESTS REQUIRED FOR PQR OF CORNER JOINT WITH SINGLE GROOVE WELD

Thank you sir, I think I got the point , (kindly correct me if I am wrong for the following);

So I will take the EN3A plate & P1GR1 Plate Material (as impact test is there) for welding and carry out the qualification.

On Fri, May 8, 2015 at 3:26 PM, <george.dilintas@gr.bureauveritas.com> wrote:

You do not need to make a mock -up.
Just take select two pieces of plates by respecting all essential and supplementary essential variables (if impact test is required).
The form of bevel and the diameter are not essential variables for ASME BPVC Section IX

best regards

Dr. Georgios Dilintas

Authorized Nuclear Inspector
Authorized Inspector Supervisor

I&F REGIONAL TECHNICAL MANAGER
BUREAU VERITAS PIRAEUS - GREECE

Tel: +30 210 40 63 113 /4 /5
Fax: +30 210 40 63 118
Cell: +30 69 44 64 62 04

vikas shelke ---08/05/2015 11:04:37---but How test specimens for Tensile tests will be drawn as the pipe thickness is 12 mm & Plate thickn

From: vikas shelke <vikas.shelke84@gmail.com>
To: materials-welding@googlegroups.com
Date: 08/05/2015 11:04
Subject: Re: [MW:23232] TESTS REQUIRED FOR PQR OF CORNER JOINT WITH SINGLE GROOVE WELD
Sent by: materials-welding@googlegroups.com

but How test specimens for Tensile tests will be drawn as the pipe thickness is 12 mm & Plate thickness is 30 mm?

On Fri, May 8, 2015 at 7:51 AM, <george.dilintas@gr.bureauveritas.com> wrote:
This qualifies as a butt joint

Sent from my BlackBerry 10 smartphone.
From: vikas shelke
Sent: Πέμπτη, 7 Μαΐου 2015 - 20:08
To: materials-welding@googlegroups.com
Reply To: materials-welding@googlegroups.com
Subject: [MW:23229] TESTS REQUIRED FOR PQR OF CORNER JOINT WITH SINGLE GROOVE WELD

Hello everyone,
I have to qualify EN3A Plate to SA 106 Gr B Pipe Corner joint with single J Groove outside
.
Will you please suggest the TESTS required for the qualification of Procedure as per ASME Sec IX;

--

Regards,

Vikas

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALmPzdUGSyoZAkzZS51h3S5Q2CkwXzYEUh-rih%3Df%3DgtUFzTE2A%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com
--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/20150508022113.6443092.45445.5719%40gr.bureauveritas.com.
For more options, visit https://groups.google.com/d/optout.

--

Regards,

Vikas Shelke,

+91-9881749268.
--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding
.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALmPzdWHgouKLq_G4ifzB9245V%3DraLfGXOX9fnhUzuYn%2Bfr0Bw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/OF76223031.B15EB0B8-ONC2257E3F.003587CC-C2257E3F.00369F83%40LocalDomain.

For more options, visit https://groups.google.com/d/optout.