Re: [MW:23232] TESTS REQUIRED FOR PQR OF CORNER JOINT WITH SINGLE GROOVE WELD

but How test specimens for Tensile tests will be drawn as the pipe thickness is 12 mm & Plate thickness is 30 mm?

On Fri, May 8, 2015 at 7:51 AM, <george.dilintas@gr.bureauveritas.com> wrote:

This qualifies as a butt joint

Sent from my BlackBerry 10 smartphone.

From: vikas shelke Sent: Πέμπτη, 7 Μαΐου 2015 - 20:08 To: materials-welding@googlegroups.com Reply To: materials-welding@googlegroups.com Subject: [MW:23229] TESTS REQUIRED FOR PQR OF CORNER JOINT WITH SINGLE GROOVE WELD

Hello everyone,

    I have to qualify EN3A Plate to SA 106 Gr B Pipe Corner joint with single J Groove outside

.

Will you please suggest the TESTS required for the qualification of Procedure as per ASME Sec IX;

    

--

 
 Regards,

   Vikas 

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALmPzdUGSyoZAkzZS51h3S5Q2CkwXzYEUh-rih%3Df%3DgtUFzTE2A%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/20150508022113.6443092.45445.5719%40gr.bureauveritas.com.
For more options, visit https://groups.google.com/d/optout.

--

 
 Regards,

Vikas Shelke,

+91-9881749268.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALmPzdWHgouKLq_G4ifzB9245V%3DraLfGXOX9fnhUzuYn%2Bfr0Bw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.