Re: [MW:23251] PPE in orbit vlaves

Dear Yokesh,

May be valve is equipped with cavity vent hole therefore preferred pressure direction shall be followed.

Sent from my iPhone

On May 7, 2015, at 8:38 AM, TDK YOKESH <tdky167@gmail.com> wrote:

Warm Greetings folks ,

Being a welding/ material forum , I dont know whether I should be posting this .

What is PPE ( preffered Pressure End ) ??? How does it affect the flow ??? What if the flow direction and PPE  are different as per ISO?? how should the valve be installed . I mean with respect to PPE or flow direction ??? Please clarify . 

--

Best regards,

TDK YOKESH

QC INSPECTOR ( PIPING AND WELDING )

QUALITY CONTROL DEPARTMENT

Plot D1, Lumut Port Industrial Park,

Kg. Acheh, Mukim of Lumut,

Daerah Manjung, 32000 Sitiawan,

Perak Darul Ridzuan,

Malaysia

Tel No. : +601126527600

Email: tdky167@gmail.com

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKT-TupYUac4gJpOfpFPtaE3CxW21Xn-nKesTc9QJLRN_jMTrw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.