Please refer to the following paper:
http://www.documentation.emersonprocess.com/groups/public/documents/reference/d351798x012_09.pdf
Best regards
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of PUB:meisam shokri arfaei
Sent: segunda-feira, 29 de setembro de 2014 05:34
To: materials-welding@googlegroups.com
Subject: Re: [MW:22012] Hardness relation with H2S environment
I think during hardness you could find exact values related to each area (base metal, weld metal, fusion line and HAZ refer to hardness sketch) but in other tests such as tensile you will find a summary of properties for those areas together (that is not good for root cause analysis or developing design or fit for purpose).
Also if any doubt remain after hardness, it is practical that you check values again or doing retest. Also check values in relationship with microstructure which are not practical after destructive tests.
Regards
On Mon, Sep 29, 2014 at 10:48 AM, Vijay Katkar <katkar.vijay22@gmail.com> wrote:
Hi All,
Why NACE is restricting hardness value? Why Not other properties e.g Yield ... etc.
What is the relations between hardness and cracking behaviour ?
Kindly provide your valuable views on this.
Best regards
Vijay Katkar
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
M. Shokri Arfaei
ISA-ISTS - Metallurgy Lab. Manager
ASNT NDT Level III
International Welding Engineer
Tel.: +98 21 66282127
Fax: +98 21 66282779
Mob.:+98 912 1394023
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment